Replacement lamp for SIG Blomax 10

Sun, 12 Jul 2026 08:24:25 +0800

Getting Your Sidel Blomax Lamps Right

If you’ve spent any time around Sidel blow molders, you know the headache. Whether you’re running an old-school SBO or a newer Matrix, keeping your heat consistent is a nightmare. Most people think you just match the wattage and call it a day. But it’s not that simple. We built our replacement lamps for the Blomax 10 to be a true “plug and play” situation. No fuss, no fighting with the hardware. Just a clean swap. The nitty-gritty on power Getting PET preforms to that exact glass transition temperature is a balancing act. If your voltage is even slightly off, you’re looking at uneven heating or, worse, filaments that burn out way too soon. We spec these lamps to fit the OEM footprint exactly. Now, here is the thing: high-wattage tubes are great for fast cycle times, but they put a lot of stress on your power supplies. Before you swap them in, take a look at your electrical panels. If your contactors are pitted or dirty, you’ll get voltage drops that kill your efficiency. No drilling, no bending Nobody wants to spend their weekend modifying a machine. That’s why we use high-purity quartz glass. It handles the thermal shock of rapid cycling without cracking. We also spent a lot of time mapping the dimensions of the SBO and Matrix series so the end caps slide right into the sockets. You don’t need to bend brackets or drill new holes. You just pull the old tube out, wire the new one up, and you’re back in business. The trade-off These lamps are built for the grind. By matching the spectral output of the original lamps, your heat profiles stay where they belong. But there is a catch. If you push these lamps to their max wattage to get those Matrix-level speeds, your oven housing is going to soak up a lot of that heat. Keep your cooling fans dusted and clear. If you don’t, you risk warping your reflectors over time. It’s a small price to pay for higher throughput, but it’s something you can’t ignore.

Replacement lamp for Sidel SBO 10

Thu, 09 Jul 2026 08:20:16 +0800

Introduction

We built this heating lamp because we heard the same frustration over and over: the original tubes on your SIG Blomax lines just keep failing. So we created a tougher, longer-lasting replacement that slides right in where the Sidel SBO 10 goes. The whole point? Stop the endless cycle of downtime and keep your PET blowing line humming.

The Specs, Without the Fluff

This lamp runs at 400V and 2500W, packing enough punch to deliver high heat density across a 300mm active zone. That power level lines up exactly with what the SBO 10 needs, so preforms hit the right temperature profile—no overshoot, no underperformance. And that 300mm length? It’s not a suggestion. It’s a must. It ensures the lamp sits perfectly in line with the preform path.

10 on Warm IR Heating Techno | Infrared Home Heating Advanced Tech

Replacement lamp for SIG Blomax 10

Getting Your Sidel Blomax Lamps Right

Replacement lamp for Sidel SBO 10

Introduction

The Specs, Without the Fluff